(Since you are reading adapter via telnet the firewall appears ok.)From: tomsnell mailto:Sent: Monday, Septem1:43 PMTo: mtconnect/adapterSubject: adapter Fanuc Adapter I have been attempting to set this adapter up to a series 30i Fanuc controller with the focas2 libraries. If it’s an Ethernet focas library you don’t have to be on the actual controller to get it to work. You’re Ethernet fwlib32.dll should have a size of 861K.8193 is the correct Ethernet IP port for focas. If you don’t have the correct Fwlib32.dll it won’t connect. You need the ethernet focas dll (hope you don’t have the hssb fwlib32.dll). Fanuc Focas Ethernet Driverĭoes anyone have any ideas what I am missing? Is Focas installed on your controller? If so, don’t copy in new Fwlib32.dll. I setup wireshark to see if it was sending anything to the machine, I did not see any traffic coming from the :adapterport = 7878service = MTC Focus 1focushost = 10.81.1.46port = 8193macrospmcSspeedOvr = 30Fovr = 12I also set the machine ip address and port.
I have followed the example onI am trying to check the adapter usingtelnet 127.0.0.1 7878My results are from the adapter:Connecting to Machine at 10.81.1.46 and port 8193Result: -15from telnet:(Connection to host lost happens when I stop the adapter, I meant to not copy that part.)From the example youtube video, it appears that it when you get -15, it isn't connecting to the machine.
I have been attempting to set this adapter up to a series 30i Fanuc controller with the focas2 libraries.
0 kommentar(er)
